Surface Tolerant Epoxy – Interseal 670HS

Référence Interseal® 670HS

Description

A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.

Intended uses

For application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.
Provides excellent anti-corrosive protection in industrial, coastal structures, pulp and paper plants, bridges and offshore environments in both atmospheric exposure and immersion service.

Color Available in a wide range of colors including Aluminum

Gloss Level Semi-gloss (Aluminum is eggshell)

Volume Solids 82% ± 3% (depends on color)

Typical Thickness

4-10 mils (100-250 microns) dry equivalent to
4.9-12.2 mils (122-305 microns) wet

Theoretical Coverage

263 sq.ft/US gallon at 5 mils d.f.t and stated volume solids
6.56 m2/litre at 125 microns d.f.t and stated volume solids

Practical Coverage Allow appropriate loss factors

Method of Application Airless spray, Air spray, Brush, Roller