High solids epoxy primer – Corlar 3.0

Référence Corlar® 3.0

Description

A high solids, two component, VOC conforming (3.0 lbs./gal.) Low HAPS productive primer based on Axalta epoxy technology. The resulting primer is formulated to be highly durable with very fast dry times and to deliver excellent corrosion and chemical resistance.

Suggested used

As a highly durable primer on properly prepared substrates where:
• Recoating in 30 minutes is required for maximum productivity.
• No induction time and long pot life will improve productivity.
• A smooth, primer at 3 mils DFT for maximum appearance when topcoated is required.
• A high build primer up to 4 mils DFT over abrasive blasted or power tool cleaned carbon steel substrates is needed.

Corlar 3.0 PR is intended to be used as a primer and should be topcoated.

Compatibility with other coatings

Corlar 3.0 PR is highly compatible with most coating types. It may be used over most
aged and hard cured coatings in good condition. Testing for lifting, bubbling and adhesion
is recommended to assure compatibility with unknown coatings. Contact your Axalta
representative for specific recommendations.

Not recommended for

Immersion service

Performance properties

(with appropriate topcoat)
Alkalis Excellent
Solvents Excellent
Acids Very Good
Humidity Excellent
Weather Excellent (will chalk if left untopcoated)

Color

2525-100™ White 2525-400™ Gray