Bar-Rust – 235

Référence Bar-Rust® 235
Surface Tolerant Epoxy

Description

A high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating.

Intended uses

For use on properly prepared steel or masonry surfaces including immersion (non-potable water) service. Ideal for structural steel, piping, storage tank exteriors, machinery, and equipment in petroleum refineries, pulp and paper mills, chemical and fertilizer plants, and sewage treatment plants.

Performance alternate for Federal Specifications TT-C-550 and TT-C-545. Meets AWWA D102

Color Off White, custom and ready-mix colors

Gloss Level Semi-gloss

Volume Solids 68% ± 2%

Typical Thickness 4-8 mils (100-200 microns) dry equivalent to 5.9-11.8 mils (147-294 microns) wet

Theoretical Coverage 

182 sq.ft/US gallon at 6 mils d.f.t and stated volume solids
4.53 m²/liter at 150 microns d.f.t and stated volume solids

Practical Coverage Allow appropriate loss factors

Method of Application Airless Spray, Roller, Air Spray, Brush